Refrigerated Travel Case for Insulin & Medication

Storage Capacity for Insulin

• Up to 3 insulin pens: ProtaPhane, Novomix 30/70, Novomix 50, Novolin, Admelog, Toujeo, Soliqua, NovoRapid, Lantus, Insuman, Trurapi, Actrapid, Apidra, Novolog, Insulatard.
• Up to 2 insulin pens: Semglee, Levemir, Tresiba 100, Tresiba 200, Basaglar, Humalog 200, Lyumjev, Fiasp, Humalog Mix 50/50, Humalog Mix 75/25, Humulin NPH, Ryzodeg, Xultophy.

ℹ️ Important Note

This list is not exhaustive. Medication formats and sizes may vary by brand and country. If you don’t see your treatment listed, please check the product images or contact us for personalised guidance — we’re happy to help you choose the right size.

Storage Capacity for GLP-1 Meds

• Up to 3 injection pens or syringes: Victoza, Mounjaro KwikPen.
• Up to 2 injection pens or syringes: Saxenda, Byetta, Ozempic, Wegovy.
• Up to 1 injection pen or syringe: Mounjaro (Tirzepatide), Trulicity, Zepbound.

ℹ️ Important Note

This list is not exhaustive. Medication formats and sizes may vary by brand and country. If you don’t see your treatment listed, please check the product images or contact us for personalised guidance — we’re happy to help you choose the right size.

Voyager Mini Storage Capacity for Other Medications

• Up to 3 injection pens or syringes: Tymlos (Abaloparatide), Movymia, Terrosa, Alvogen teriparatide, Besremi, Novopen.
• Up to 2 injection pens or syringes: Benepali, Entyvio, Follistim, Repatha, Praluent 75 mg, Praluent 150 mg, Aimovig, Enbrel, Amgevita 40 mg, Copaxone 40 mg, Remsima 120 mg, Gvoke HypoPen, Ngenla, Gonal-F, Omnitrope, NordiFlex, SurePal 10, Sogroya.
• Up to 1 injection pen or syringe: Nutropin, Gemfrac, Hadlima, Hyrimoz, Imraldi, Actemra, Erelzi, Kesimpta, Nucala (Mepolizumab), Benlysta, Humira, Kevzara, Forteo, Sondelbay, Avonex, Bydureon BCise, Fasenra, Zymfentra, BAQSIMI Glucagon, Cosentyx 150 mg, Evenity, Caverject (Alprostadil), Ebglyss, Dupixent 200 mg, Dupixent 300 mg, Andembry, Tyenne, Simlandi (Adalimumab), Genotropin 12 mg pen, HumatroPe, Metoject, Yuflyma, Praluent 300 mg, Abrilda.

ℹ️ Important Note

This list is not exhaustive. Medication formats and sizes may vary by brand and country. If you don’t see your treatment listed, please check the product images or contact us for personalised guidance — we’re happy to help you choose the right size.

Cooling Performance in Biogel Mode

🌡️ Mild Conditions (30°C): Keeps insulin and medications refrigerated between 2–8°C for up to 30 hours, and cool below 26°C for up to 48 hours.

🌡️ Hot Conditions (35°C): Keeps insulin and medications refrigerated between 2–8°C for up to 28 hours, and cool below 26°C for up to 46 hours.

🌡️ Extreme Heat (40°C): Keeps insulin and medications refrigerated between 2–8°C for up to 26 hours, and cool below 26°C for up to 44 hours.

Cooling Performance in USB Mode

🌡️ Mild Conditions (30°C): Keeps insulin and medications refrigerated between 2–8°C as long as it is powered by electricity.

🌡️ Hot Conditions (35°C): Keeps insulin and medications refrigerated between 2–8°C as long as it is powered by electricity.

🌡️ Extreme Heat (40°C): Keeps insulin and medications cool between 8–26°C as long as it is powered by electricity (not refrigerated).

How to Use Your Mini Refrigerated Travel Case

Whether you’re heading off on holiday, commuting into work, travelling interstate or overseas, enjoying the Aussie countryside, the Voyager Mini offers a practical and reliable way to keep your insulin and temperature-sensitive medicines properly cooled. 

With two convenient cooling options—one powered, one passive—it’s built to suit life on the move across Australia and beyond.

You can either plug it in using a USB connection when electricity is available, or rely on the reusable Biogel cooling pack for off-grid peace of mind. Below, you’ll find step-by-step instructions for both methods.

Using the Biogel Cooling Pack (No Electricity Required)

Ideal for situations where you’re away from a power source—such as flights, coach trips, hiking holidays, or even just a long day out—the Biogel cooling method allows you to keep your insulin and medicines chilled without any need for plugs or charging.

Step-by-step:

1. Prepare the Cooling Pack: Shake the Biogel cooling pack four or five times to ensure the gel is evenly distributed throughout.
2. Freeze Thoroughly: Place the cooling pack in your freezer for 6 to 8 hours before use. It’s absolutely fine to leave it in longer—it won’t damage the pack.
3. Brief Defrosting: Before placing it into the cooler, allow the frozen pack to sit at room temperature for 10–15 minutes, or submerge it in lukewarm tap water for 2–3 minutes. This prevents frost from forming inside the case and protects your medication from accidental freezing.
4. Pack and Go: Dry the cooling pack thoroughly with a clean tea towel. Then load your medicines into the cooler, insert the cooling pack, and secure the standard lid (not the USB lid). You’re now ready to travel with your insulin and medicine safely cooled—no power required.

Using USB Power for Continuous Refrigeration while Travelling

When you’re near a power source—such as at home, in a hotel room, in the car, or have a portable power bank—you can use the USB-powered lid for constant refrigeration.

Works with most USB power sources, including:

• Portable power banks
• Car cigarette lighter adaptors
• Portable solar charging panels
• Standard household sockets with USB ports

How to use:

1. Load Your Medication: Place your insulin pens, vials, or syringes inside the cooler’s chamber as shown in the product images.
2. Close and Connect: Secure the USB lid, plug the cable into your chosen USB power source, and the cooler will begin chilling automatically. No buttons or programming required—simple and straightforward.

Care, Cleaning & Maintenance of Your Voyager Mini

Your refrigerated travel case is a long-lasting medical device, so it’s important to give it the right care. Here’s how to keep everything running smoothly:

✅ Best Practices:

• Keep Upright: Always use and store the cooler in an upright position to ensure it functions correctly.
• Ventilation: Make sure the small heat-dissipation holes on the USB lid are never blocked.
• Dusting: Gently blow away any dust using a can of compressed air or a hairdryer on the cool setting every couple of weeks.
• Rest Periods: Unplug the USB lid for around 15–20 minutes every 4 days of continuous use to give the system a rest. This helps extend the life of the cooling component.

✅ Cleaning:

• Use a damp cloth to wipe the stainless steel body.
• For the USB lid and Biogel pack, use a dry, soft cloth.
• Avoid direct contact with water—especially near any electronic parts.

❌ Avoid the Following

• Don’t submerge any part of the cooler in water.
• Don’t use abrasive cloths or harsh chemical cleaners, as these can damage surfaces.
• Don’t leave the cooler plugged in non-stop for weeks without breaks. Like most electronics, it benefits from a pause now and again.

Additional Tips: If you notice any light marks or oxidation on the aluminium components, don’t worry—it’s a natural reaction and can be easily cleaned with a suitable aluminium polish.

⚖️ Cooler Weight:

• Biogel Configuration: 420 g
• USB Configuration: 500 g

📏 Dimensions & Internal Capacity

Designed for compact, everyday medical transport, the Voyager Mini combines a slim external profile with optimised internal storage.

External Dimensions

• Height: 27.5 cm
• Diameter: 6.5 cm
• Base width: 4.6 cm

Internal Usable Space

• Usable internal length: 18 cm

Internal Free Space (Diameter)

• With USB Lid (Active Mode): 4.6 cm
• With Biogel (Passive Mode): 3.3 cm
• Biogel core width (widest point): 5.8 cm

The internal chamber is engineered for vertical pen storage and stable airflow to support consistent temperature regulation.

🧱 Travel Case Materials & Construction

Built for durability, insulation performance and long-term daily use.

5-Layer Insulation System

• Wear-resistant & scratch-resistant outer coating
• Food-grade 304 stainless steel exterior
• Vacuum compression insulation layer
• Copper-plated isolation layer
• 304 stainless steel inner liner

This multi-layer structure enhances thermal stability while maintaining a lightweight, travel-ready design.

🌡️ USB-Lid Active Cooling System

The Voyager Mini features intelligent, USB-powered temperature regulation.

• USB-C power port (USB-C to USB-A cable included)
• New downward-angled USB port design
• Integrated temperature display
• Automatic regulation between 2–8°C
• Auto shut-off and auto restart for temperature stability
• Operating sound level: under 40 dB (quiet, sleep-safe level)

The system maintains refrigerator-grade temperatures while remaining compact and portable.

• 1 × Voyager Mini Medical Cooler
• 1 × Biogel Ice Pack
• 1 × Empty Emergency Cooling Bottle (for ice or cold water use)
• 1 × Insulated Carry Bag with Adjustable Shoulder Strap
• 1 x USB Cable & Charger
• 1 × User Instructions

Additional Biogel cooling packs are available separately for extended, swap-and-go cooling.

Package Weight: 1.36 kg
Package Dimensions: 32 x 18 x 10 cm